Android Client Setup

On the phone/tablet/device:

• Go to the system settings and VPN settings (varies by device and specific Android version
• Tap Add VPN Profile
• Enter a name
• For Type, tap L2TP/IPsec PSK
• Server Address: The WAN IP of the AZTCO-FW router (or the IP of the interface chosen for IPsec and L2TP)
• L2TP Secret: Left blank
• IPsec Identifier: Enter the identifier for the PSK entered above, either a per-user or common identifier
• IPsec Pre-Shared Key: The PSK that goes with the identifier for this user/group
• The advanced options may be used to control which networks will attempt to use the VPN, or specify custom DNS server and domains for this client.
• Tap Save
• From the VPN list, tap the newly created VPN entry
• Enter the username and password from the L2TP Users tab entered above
• Check Save account information to save the VPN credentials (not recommended!),
• Tap Connect

The connection should then connect and function. If it does not work, check the IPsec logs and the Status > System Logs, VPN, L2TP Raw log to see more specific errors.